To configure Sagem/Sagemcom wireless router:
- From the Wi-Fi Inspector results screen, select Go to your router settings to open the administration page of your Sagem/Sagemcom router.
- Enter your router username and password, or contact the party who provided the router (e.g., your ISP).
- Go to
Wireless ▸ Security .
- or -
Go toSetup ▸ Wireless setup ▸ Wireless security . - For
Network Authentication , selectWPA2-PSK .
- or -
ForWireless Security Mode , selectWPA2-PSK , and then forWPA mode , selectWPA2-Personal . - For
WPA Encryption , orEncryption mode , select AES, if available. - In the
WPA Pre-Shared key field, create a password to encrypt your WiFi network. If forgotten, you must change it here again. - Confirm your changes by selecting
Apply , orSave/Apply and reboot your router if necessary.
To configure wireless network devices:
- Go to wireless settings for each of your devices connected to the router and view wireless networks within range.
- From the list of available wireless networks select the name (SSID) of your wireless network.
- When asked, enter the Wireless password (or Passphrase, Network/Pre-shared key, etc.) you specified for WPA2 encryption of your wireless router.
- If needed, confirm, to establish a wireless connection between your router and the device.
Note:
Due to the wide range of different router types by Sagem/Sagemcom, and other network devices, we can offer vendor-specific instructions for frequently used routers, or general instructions for all other routers. For exact instructions please consult documentation for your router model, or network device or contact Sagem/Sagemcom for further assistance.