Alert icon

Your wireless network is not secure!

Hackers can connect to your Wi-Fi to use the bandwidth and access your data and other devices in the network. Your personal data may be at risk.

To configure Sagem/Sagemcom wireless router:


  1. From the Wi-Fi Security results screen, select Go to your router settings to open the administration page of your Sagem/Sagemcom router.
  2. Enter your router username and password, or contact the party who provided the router (e.g., your ISP).
  3. Go to WirelessSecurity.
    - or -
    Go to SetupWireless setupWireless security.
  4. For Network Authentication, select WPA2-PSK.
    - or -
    For Wireless Security Mode, select WPA2-PSK, and then for WPA mode, select WPA2-Personal.
  5. For WPA Encryption, or Encryption mode, select AES, if available.
  6. In the WPA Pre-Shared key field, create a password to encrypt your WiFi network. If forgotten, you must change it here again.
  7. Confirm your changes by selecting Apply, or Save/Apply and reboot your router if necessary.

To configure wireless network devices:


  1. Go to wireless settings for each of your devices connected to the router and view wireless networks within range.
  2. From the list of available wireless networks select the name (SSID) of your wireless network.
  3. When asked, enter the Wireless password (or Passphrase, Network/Pre-shared key, etc.) you specified for WPA2 encryption of your wireless router.
  4. If needed, confirm, to establish a wireless connection between your router and the device.

Note:

Due to the wide range of different router types by Sagem/Sagemcom, and other network devices, we can offer vendor-specific instructions for frequently used routers, or general instructions for all other routers. For exact instructions please consult documentation for your router model, or network device or contact Sagem/Sagemcom for further assistance.

Avast Wi-Fi Security supported alerts:



© 1988-2021 Copyright Avast Software s.r.o.